Version 2 - Current Planning Scheme
- Citation and commencement
- Part 1 About the planning scheme
- Part 2 State planning provisions
- Part 3 Strategic framework
- Part 4 Local Government Infrastructure Plan (LGIP)
- Part 5 Tables of assessment
- Part 6 Zones
- Part 7 Local plans
- Part 8 Overlays
- Part 9 Development codes
- Part 10 Other plans
- Schedule 1 Definitions
- Schedule 2 Mapping
- Schedule 3 Local Government Infrastructure Plan (LGIP) mapping and tables
- Schedule 4 Notations required under the Planning Act 2016
- Schedule 5 Land designated for community infrastructure
- Schedule 6 Planning scheme policies
9.3 Use codes
9.3.1 Advertising devices
This code applies to the assessment of operational work for placing an advertising device on a road corridor or on premises, where the code is identified as applicable in the tables of assessment.
- The purpose of the advertising devices code is to:
- Facilitate economic activity through the advertising of business, products, services and to share information with the community.
- Provide unique and creative static and digital signage that contributes to the character and vibrancy of the setting.
- Ensure that advertising devices do not adversely affect visual amenity, the character of the local area and public safety.
- The purpose of the code will be achieved through the following overall outcomes:
- An advertising device complements, and does not detract from, the desirable characteristics of the natural and built environment in which the advertising device is exhibited.
- An advertising device is designed and integrated on the site so as to minimise visual clutter, particularly along major road corridors.
- An advertising device does not pose a hazard for pedestrians, cyclists or drivers of motor vehicles.
- An advertising device does not unreasonably impede views, sunlight or breezes for residents on adjoining sites, or create nuisance as a result of noisy, flashing or illuminated devices.
22.214.171.124 Description of advertising devices
|Advertising device type||Written description|
On premises advertisng device
|An advertising device intended to display the name or occupation of the use on the site or use on another site irrespective of particular design features.|
Transport corridor advertisng device
|A free standing or roof mounted advertising device located near or adjacent to a transport corridor for the purpose of advertising to the community.|
126.96.36.199 Description of urban and non-urban zones
Low density residential
Low-medium density residential
Medium density residential
Sport and recreation
Low impact industry
Medium impact industry
Note—Table 188.8.131.52 is only to be used in conjunction with the Advertising devices code and is not to be used for assessment with any other code of the planning scheme.
184.108.40.206 Assessment benchmarks
Table 220.127.116.11.1—Accepted development subject to requirements and assessable development
|Performance outcomes||Acceptable outcomes|
Character and amenity
The advertising device is designed and sited in a manner that:
Advertising devices do not exceed 8.5m in height from natural ground level in an urban zone and no greater than the permissible building height in a non-urban zone.
On premises advertising device do not exceed more than 10% of the total building façade where in a non-urban zone.
On premises advertising device do not exceed more than 30% of the total building façade where in a urban zone.
Transport corridor advertising device do not exceed a maximum face area of 48m2 per advertising device.
Transport corridor advertising devices, are located a minimum distance of at least 800 meters from any other existing or approved advertising device where in a non-urban zone.
Transport corridor advertising devices, are located a minimum distance of at least 200 meters from any other existing or approved device where in a urban zone.
An advertising device only incorporates illumination, lighting, sound, odour or movement where it:
Where the advertising device is illuminated it:
The advertising device does not revolve, contain moving parts or have a moving border.
Safety of pedestrians and vehicles
An advertising device is designed so as not to create a traffic or pedestrian safety hazard.
The advertising device does not physically obstruct the passage of pedestrians or vehicles.
The advertising device does not mimic, and is not able to be confused with, a traffic control device or traffic signage.
The advertising device does not restrict sight lines at intersections and site access points.
Services and Infrastructure
Advertising devices do not impact, damge or cause consequential damage to public utilities or services.
The footings of an advertising device are not located within the zone of influence of any public utilities or services.
Note—A Building Section Plan is provided to demonstrate compliance with AO4.1 and Council Policy 19.7 - Revision 1 - Building Adjacent to and Over Sewers, Stormwater and Water assets (or relevant policy).
Advertising adjacent to or located at a place of local heritage significance is designed and sited in a manner that:
The advertising device is not proposed on or adjoining a premises that is listed as a local heritage place or shown on the heritage overlay.