• Skip to content
  • Skip to navigation
Print header
X

  • (07) 4970 0700
  • Online Services

«Back to
Gladstone Regional Council

Version 2 - Current Planning Scheme

  • Citation and commencement
  • Part 1 About the planning scheme
      BackPart 1 About the planning scheme
    • 1.1 Introduction
    • 1.2 Planning scheme components
    • 1.3 Interpretation
    • 1.4 Categories of development
    • 1.5 Hierarchy of assessment benchmarks
    • 1.6 Building work regulated under the planning scheme
    • 1.7 Local government administrative matters
  • Part 2 State planning provisions
      BackPart 2 State planning provisions
    • 2.1 State planning policy
    • 2.2 Regional plan
    • 2.3 Referral agency delegations
    • 2.4 Regulated requirements
  • Part 3 Strategic framework
      BackPart 3 Strategic framework
    • 3.1 Preliminary
    • 3.2 Strategic intent Open
        Back3.2 Strategic intent
      • The Gladstone Region Places Model
    • 3.3 Gateway to the world
    • 3.4 Community living
    • 3.5 Connecting our places
    • 3.6 Building it better: our urban areas
    • 3.7 Our environment and heritage
    • 3.8 Our rural and coastal townships and places
  • Part 4 Local Government Infrastructure Plan (LGIP)
      BackPart 4 Local Government Infrastructure Plan (LGIP)
    • 4.1 Preliminary
    • ​4.2 Planning assumptions Open
        Back​4.2 Planning assumptions
      • 4.2.1 Purpose
      • ​​4.2.2 Population and employment growth
      • ​4.2.3 Priority infrastructure area
      • ​​4.2.4 Desired standards of service
      • 4.2.5 Plans for trunk infrastructure
      • 4.2.7 Schedules of works
      • 4.2.8 Extrinsic material
  • Part 5 Tables of assessment
      BackPart 5 Tables of assessment
    • 5.1 Preliminary
    • 5.2 Reading the tables
    • 5.3 Categories of development and assessment
    • 5.4 Regulated categories of development and categories of assessment prescribed by the Regulation
    • 5.5 Categories of development and assessment—Material change of use Open
        Back5.5 Categories of development and assessment—Material change of use
      • 5.5.1 Low density residential zone
      • 5.5.2 Low-medium density residential zone
      • 5.5.3 Medium density residential zone
      • 5.5.4 Character residential zone
      • 5.5.5 Emerging community zone
      • 5.5.6 Mixed use zone
      • 5.5.7 Centre zone
      • 5.5.8 Principal centre zone
      • 5.5.9 Neighbourhood centre zone
      • 5.5.10 Specialised centre zone
      • 5.5.11 Low impact industry zone
      • 5.5.12 Medium impact industry zone
      • 5.5.13 Special industry zone
      • 5.5.14 Industry investigation zone
      • 5.5.15 Special purpose zone
      • 5.5.16 Rural zone
      • 5.5.17 Rural residential zone
      • 5.5.18 Township zone
      • 5.5.19 Major tourism zone
      • 5.5.20 Minor tourism zone
      • 5.5.21 Community facilities zone
      • 5.5.22 Sport and recreation zone
      • 5.5.23 Open space zone
      • 5.5.24 Environmental management zone
      • 5.5.25 Conservation zone
      • 5.5.26 Limited development zone (constrained land)
    • 5.6 Categories of development and assessment: Reconfiguring a lot
    • 5.7 Categories of development and assessment: Building work
    • 5.8 Categories of development and assessment: Operational work
    • 5.9 Categories of development and assessment: Local plans
    • 5.10 Categories of development and assessment: Overlays
  • Part 6 Zones
      BackPart 6 Zones
    • 6.2 Zone codes
        Back6.2 Zone codes
      • 6.2.1 Low density residential
      • 6.2.2 Low–medium density residential
      • 6.2.3 Medium density residential
      • 6.2.4 Character residential
      • 6.2.5 Centre
      • 6.2.6 Principal centre
      • 6.2.7 Neighbourhood centre
      • 6.2.8 Sport and recreation
      • 6.2.9 Open space
      • 6.2.10 Environmental management
      • 6.2.11 Conservation
      • 6.2.12 Low impact industry
      • 6.2.13 Medium impact industry
      • 6.2.14 Special industry
      • 6.2.15 Industry investigation
      • 6.2.16 Major tourism
      • 6.2.17 Minor tourism
      • 6.2.18 Community facilities
      • 6.2.19 Emerging community
      • 6.2.20 Limited development
      • 6.2.21 Mixed use
      • 6.2.22 Rural
      • 6.2.23 Rural residential
      • 6.2.24 Special purpose
      • 6.2.25 Specialised centre
      • 6.2.26 Township
  • Part 7 Local plans
  • Part 8 Overlays
      BackPart 8 Overlays
    • 8.2 Overlay codes Open
        Back8.2 Overlay codes
      • 8.2.1 Acid sulfate soils
      • 8.2.2 Airport environs
      • 8.2.3 Biodiversity
      • 8.2.4 Bushfire hazard
      • 8.2.5 Coastal hazard
      • 8.2.6 Extractive resources and minerals
      • 8.2.7 Flood hazard
      • 8.2.8 Hazardous activities
      • 8.2.9 Heritage
      • 8.2.10 Regional infrastructure
      • 8.2.11 Scenic amenity
      • 8.2.12 Steep land
      • 8.2.13 Water resource catchment
  • Part 9 Development codes
      BackPart 9 Development codes
    • 9.2 Development that cannot be made assessable in accordance with Schedule 6 of the Planning Regulation 2017
    • 9.3 Use codes Open
        Back9.3 Use codes
      • 9.3.1 Advertising devices
      • 9.3.2 Development design
      • 9.3.3 Extractive industry
      • 9.3.4 Home based business
      • 9.3.5 Landscaping
      • 9.3.6 Operational works
      • 9.3.7 Reconfiguring a lot
      • 9.3.8 Telecommunications facility use
  • Part 10 Other plans
  • Schedule 1 Definitions
      BackSchedule 1 Definitions
    • SC1.1 Use definitions Open
        BackSC1.1 Use definitions
      • SC1.1.1 Defined activity groups
      • SC1.1.2 Industry thresholds
      • Table Sc1.1.1—Index of use definitions
    • SC1.2 Administrative definitions
  • Schedule 2 Mapping
  • Schedule 3 Local Government Infrastructure Plan (LGIP) mapping and tables
      BackSchedule 3 Local Government Infrastructure Plan (LGIP) mapping and tables
    • SC3.1 Planning assumptions tables
    • SC3.2 Schedules of works
    • SC3.3 Local government infrastructure plan maps​
    • SC3.4 Glossary and abbreviations
  • Schedule 4 Notations required under the Planning Act 2016
  • Schedule 5 Land designated for community infrastructure
  • Schedule 6 Planning scheme policies
      BackSchedule 6 Planning scheme policies
    • SC6.1 Planning scheme policy index
    • SC6.2 Engineering design
    • SC6.3 Plans of development
    • SC6.4​ Community and economic needs assessment
    • SC6.5​ CBD redevelopment
    • SC6.6​ Beecher/Burua constant flow precinct
    • SC6.7 Flood hazard
    • SC6.8 Heritage
    • SC6.9 Non–resident workers accommodation
    • SC6.10 Vehicle parking rates
    • SC6.11 Waste management
  • Appendices
Version 2 - Current Planning Scheme
  1. Home
  2. Version 2 - Current Planning Scheme
  3. Part 6 Zones
  4. 6.2 Zone codes
  5. 6.2.12 Low impact industry
Back
Online Mapping

6.2.12 Low impact industry

6.2.12.1 Application

This code applies to development where the code is identified as applicable in a table of assessment. When using this code, reference should be made to section 5.3.2 and where applicable, section 5.3.3 located in Part 5.

6.2.12.2 Purpose

  1. The purpose of the Low impact industry zone code is to provide for service and low impact industry uses that generally service local needs. Development may include non–industrial and business uses that support industrial activities where they do not compromise the long–term use of the land for industrial purposes. Development does not detract from the function and viability of the region's centres. Development facilitates the safe, efficient and attractive use of land for smaller scale industrial activities that generate low impacts. Land use activities must ensure they minimise impacts on surrounding land having regard to noise, vibration, odour, dust, light or other emissions. Adverse impacts on the health, safety or amenity of nearby residential zoned land or other sensitive land uses are minimised.
  2. The purpose of the zone will be achieved through the following overall outcomes:
    1. The zone primarily accommodates a range of generally smaller scale industrial uses which have low levels of potential impacts on surrounding areas.
    2. The zone also accommodates limited activities of wholesale, trade supplies and indoor sport and recreation uses which are difficult to locate in other areas, where these have low levels of potential impacts on surrounding areas.
    3. Other non–industrial uses that are ancillary to, and directly support, the industrial area are facilitated.
    4. The zone does not accommodate uses which are primarily oriented to retail sales and which are more appropriately located in centres, such as shops, shopping centres and large format retail showrooms. Some showroom uses are well established in the Hanson Road precinct and may continue in this precinct but must not undermine the viability of specialised centre zone areas.
    5. Uses and works for industrial purposes are located, designed and managed to maintain safety to people, avoid significant adverse effects on the natural environment and minimise impacts on adjacent non–industrial land.
    6. Development maximises the use of existing transport infrastructure and has access to the appropriate level of transport infrastructure (railways, freight routes and motorways) and facilities such as airports and seaports.
    7. Development is supported by transport infrastructure that is designed to provide and promote safe and efficient public transport use, walking and cycling.
    8. Development is designed to incorporate sustainable practices including maximising energy efficiency and water conservation.
    9. The scale, character and built form of development contributes to a high standard of amenity and makes a positive contribution to the public domain and streetscape particularly along major roads.
    10. The viability of both existing and future low impact industry uses are protected from the intrusion of incompatible uses.
    11. Development responds to land constraints, including but not limited to topography, bushfire and flooding.
    12. Adverse impacts on natural features and processes, both on–site and from adjoining areas, are minimised through location, design, operation and management of development.
    13. Development avoids significant adverse effects on water quality and the natural environment.
    14. Industrial uses are adequately separated from sensitive land uses to minimise the likelihood of environmental harm or environmental nuisance occurring.
  3. The purpose of the zone will also be achieved through the following additional overall outcomes for particular precincts:
    1. Hanson Road precinct
      1. Development contributes to the region's automotive and trade supply needs through the display and sale of motor vehicles and associated automotive repair and related services and the retailing of trade supplies.
      2. Development supports other types of showrooms at a small scale where it does not impact on the viability of the region's centres.

6.2.12.3 Assessment benchmarks

Table 6.2.12.3.1—Accepted development subject to requirements and assessable development

Performance outcomes Acceptable outcomes

Uses – Agricultural supplies store, Garden centre and Hardware and trade supplies ​

PO1

Development:

  1. does not impact on the viability of the region's centres
  2. does not compromise the low impact industry character of the locality, and
  3. does not include large format, land consumptive commercial uses.

AO1

GFA does not exceed 250m2 for any Agricultural supplies store, Garden centre and Hardware and trade supplies.

Use – Caretaker's accommodation ​

PO2

Development:

  1. is subordinate to non–residential uses on the same site, and
  2. provides adequate private open space for residents.
​ ​

AO2.1

No more than 1 caretaker's accommodation unit is established per non–residential land use.

AO2.2

Caretaker's accommodation is a maximum of 100m2 in GFA.

AO2.3

Caretaker's accommodation is provided with a private open space area:

  1. that is directly accessible from a habitable room, and
  2. where a balcony, a verandah or a deck, has a minimum area of 15m2 with a minimum horizontal dimension of 1.25m.

Use – Office ​

PO3

Offices are accommodated within the zone where they are ancillary to the primary use.

AO3

The area used for an office use does not exceed 100m2 GFA.

Use – Sales office ​

PO4

The use does not adversely impact on the amenity of the surrounding land uses and local character.

​

AO4.1

Development of the sales office is in place for no more than two years.

AO4.2

There are a maximum of 2 employees on site at any one time.

Built form (if involving building work) ​

PO5

Buildings, outdoor storage and activity areas:

  1. are appropriate to the height, scale, bulk and character of other buildings and activities in the surrounding industrial area, and
  2. do not result in a significant loss of visual amenity.
​

AO5.1

Building height does not exceed:

  1. 11m, or
  2. 8.5m where adjoining a residential premises or residential zone.

AO5.2

Site cover including any outdoor storage areas and sales yards do not exceed:

  1. 70% of the site, or
  2. 90% of the site where in the Hanson Road precinct.

PO6

Buildings, structures and low impact industry activities are setback from the road frontage to mitigate the impact of activities on the streetscape.

AO6

Buildings, structures and industrial activity areas are setback:

  1. 5m for land on a sub–arterial or arterial road, and
  2. 3m for land on a road other than a sub–arterial or arterial road.

Site area (if involving building work) ​

PO7

Development has sufficient area and frontage to accommodate the following:

  1. all buildings and associated storage areas (e.g. stockpiles)
  2. car parking areas located in a safe and accessible area
  3. on site movement of delivery and service vehicles
  4. vehicle access, and
  5. landscaping.

AO7

Premises for the following uses have a minimum site area and frontage:

  1. Low impact industry and other uses if not elsewhere identified

    1. 1,000 m2 site area
    2. 20m road frontage.
  2. Service station

    1. 1,500 m2 site area
    2. 40m road frontage.

Building design (if involving building work)

PO8

Buildings include features that contribute to an attractive streetscape.

​

AO8.1

The unarticulated length of external walls along a road frontage does not exceed 15m.

AO8.2

Buildings are designed and constructed with varying façade treatments and high quality finishes such as brick, painted concrete or masonry.

PO9

Buildings do not incorporate glass or surfaces that are likely to reflect the sun that has the potential to cause nuisance, discomfort or hazard to any part of the city and adjoining urban areas.

AO9

Any reflective glass material, metallic shade structures or other surface has:

  1. a level of light reflectivity that does not exceed 20%, and
  2. a level of heat transmission of not less than 20%.

PO10

Building entrances are legible and safe.

​ ​ ​

AO10.1

The main entry to the premises is:

  1. easily identifiable and directly accessible from the street with a clearly defined entrance point, and
  2. separate to vehicle access points.

AO10.2

Each building or tenancy is provided with a highly visible street and unit number.

AO10.3

Premises are provided with external lighting sufficient to provide safe ingress and egress for site users.

AO10.4

Office space is sited and orientated towards the principal road frontage of a site.

Amenity ​

PO11

Utility elements (including refuse areas, outdoor storage, plant and equipment, loading and unloading areas) are screened from view from the street and any adjoining land in another zone.

AO11

Utility elements are:

  1. located within or behind the building, or
  2. screened by a 1.8m high solid wall or fence, or
  3. behind landscaping having the same screening effect as a 1.8m screen fence.

Note—Screening can be provided by any combination of the above treatments to meet the acceptable outcome.

PO12

Landscaping is provided to mitigate the visual impact of development and screen unsightly components.

AO12

A minimum 2m width of landscaping is provided along the entire principal road frontage excluding the driveway.

 

PO13

Development minimises potential conflicts with, or impacts on, other uses having regard to vibration, odour, dust or other emissions.

​

AO13.1

Development achieves the air quality design objectives set out in the Environmental Protection (Air) Policy 2008, as amended.

Note—To achieve compliance, development is planned, designed and managed to ensure emissions from activities to achieve the appropriate acoustic objectives (measured at the receptor dB(A)).

AO13.2

Development that involves the storage of materials on site that are capable of generating air contaminants either by wind or when disturbed are managed by:

  1. being wholly enclosed in storage bins, or
  2. a watering program so material cannot become airborne.

PO14

Development prevents or minimises the generation of any noise so that:

  1. nuisance is not caused to adjoining premises or other nearby sensitive land uses, and
  2. desired ambient noise levels in residential areas are not exceeded.

AO14

Development achieves the noise generation levels set out in the Environmental Protection (Noise) Policy 2008, as amended.

PO15

Outdoor lighting does not adversely affect the amenity of adjoining properties or create a traffic hazard on adjacent roads.

AO15.1

Light emanating from any source complies with Australian Standard AS4282 Control of the Obtrusive Effects of Outdoor Lighting.

AO15.2

Outdoor lighting is provided in accordance with Australian Standard AS 1158.1.1 – Road Lighting – Vehicular Traffic Category V) Lighting – Performance and Installation Design Requirements.

PO16

Development provides for the collection, treatment and disposal of liquid wastes or sources of contamination such that off–site releases of contaminants do not occur.

​ ​

AO16.1

Areas where potentially contaminating substances are stored or used, are:

  1. roofed and sealed with concrete, asphalt or similar impervious substance and bunded, and
  2. located in an area free of flooding from a Defined flood event, and free from medium or high storm tide inundation.

AO16.2

Provision is made for spills to be bunded and retained on site for removal and disposal by an approved means.

AO16.3

Roof water is piped away from areas of potential contamination.

Hours of operation ​

PO17

Hours of operation are limited to minimise nuisance to any surrounding sensitive land uses.

​

AO17.1

Where within 150m of a sensitive land use or land in a residential zone, hours of operation are limited to:

  1. 7am to 6pm Monday to Friday, and
  2. 7am to 12pm Saturday.

AO17.2

Where in the Hanson Road precinct, hours of operation are limited to between 7am and 6pm Monday to Saturday.

For all assessable development ​

Land use ​

PO18

Development does not compromise the use of land for industry purposes.

No acceptable outcome is nominated.

PO19

Development is of a low impact nature and is either:

  1. a low impact industrial activity
  2. trade related
  3. difficult to locate in other zones due to land area or operational requirements (such as indoor sport and recreation uses), or
  4. small in scale and ancillary to, or directly supports, the industrial functions of the area.
No acceptable outcome is nominated.

PO20

Any Educational establishment must involve the provision of training exclusively and specifically related to industrial or trade related activities.

No acceptable outcome is nominated.

PO21

Where in the Hanson Road precinct, any showroom not associated with automotive and trade supplies:

  1. is small scale;
  2. does not form part of an integrated centre of showrooms; and
  3. does not undermine the viability of the region's network of centres. 

AO21

Where in Hanson Road precinct any showroom not associated with automotive and trade supplies has a maximum of 2,500m2 GFA. 

Amenity ​

PO22

Where adjoining a residential zone or the Emerging community zones, development provides adequate buffering and screening so that adverse impacts on privacy and amenity on adjoining properties are minimised.

​ ​

AO22.1

New buildings, plant and equipment, active outdoor use areas, site access and car parking, servicing or outdoor storage areas are set back a minimum of 5m from any boundary adjoining a residential zone or the Emerging community zone.

AO22.2

Within the setback area adjoining a residential zone or the Emerging community zone, the following is provided:

  1. a minimum 1.8m high solid boundary fence, and
  2. a densely planted landscape strip, having a minimum width of 3m and the balance setback area turfed.

AO22.3

Windows or openings that have direct views into adjoining residential buildings are provided with fixed screening that is a maximum of 50% transparent to obscure views into the adjoining residential building and maintain privacy for those residents.

PO23

Development is designed to facilitate the safety and security of people and property having regard to:

  1. maximising casual surveillance and sight lines
  2. exterior building design that promotes safety
  3. adequate lighting
  4. appropriate signage and wayfinding
  5. minimisation of personal concealment and entrapment locations, and
  6. building entrances, parking, loading and storage areas that are well lit and have clearly defined access points.

Note—Applicants should have regard to Crime Prevention through Environmental Design Guidelines for Queensland.

No acceptable outcome is nominated.

Effects of development ​

PO24

Development responds sensitively to on–site and surrounding topography, coastal foreshores, waterways, drainage patterns, utility services, access, vegetation and adjoining land uses, such that:

  1. any hazards to people or property are avoided
  2. any earthworks are minimised
  3. the retention of natural drainage lines is maximised
  4. the retention of existing vegetation is maximised
  5. damage or disruption to sewerage, stormwater and water infrastructure is avoided, and
  6. there is adequate buffering, screening or separation to adjoining development.
No acceptable outcome is nominated.

PO25

Development is located, designed and operated so that adverse environmental impacts and environmental harm on nearby land is minimised.

No acceptable outcome is nominated.

Use – Food and drink outlet ​

PO26

Development:

  1. occurs at a scale which provides for the day to day convenience needs of employees in the low impact industry area, and
  2. does not impact on the viability of the region's centres.

AO26

GFA including all seating areas does not exceed 150m2.

PO27

Development provides a safe environment for staff and patrons through:

  1. adequate separation from the source of any emissions generated by surrounding uses, and
  2. design and construction features which mitigate noise and air quality impacts on food preparation and dining areas.
No acceptable outcome is nominated.
Use – Service station

PO28

Buildings and structures allow for the safe operation of the service station.

AO28

All buildings and structures, including equipment associated with the service station operation are setback as follows:

  1. 10m from the front boundary
  2. 2m from the side and rear boundaries.

PO29

Retail components are ancillary to the service station use.

AO29

The maximum area of retail GFA is 80m2.

Use - Showroom where in the Hanson Road precinct

PO30

Design elements contribute to an interesting and attractive streetscape and building through:

  1. variations in material and building form to enable articulation of facades and differentiation between buildings;
  2. minimising the use of highly reflective materials;
  3. modulation in the facade, horizontally or vertically;
  4. articulation of building entrances and openings;
  5. corner treatments to address both street frontages; and
  6. elements which assist in wayfinding and legibility. 

​No acceptable outcome is nominated.

PO31

Building caps and rooftops contribute to the architectural distinction of the building, and effectively screen service structures, lift over-runs, plant and equipment.

​No acceptable outcome is nominated.

​PO32

Buildings are oriented to:

  1. the major street frontages and any public open space and public areas to:
    1. promote interaction and casual surveillance;
    2. concentrate and reinforce pedestrian activity; and
    3. avoid opaque facades to provide visual interest to the frontage.

​No acceptable outcome is nominated.

​PO33

Building and pedestrian entries:

  1. are visible from the street and car parking areas;
  2. incorporate sun and rain shelter, such as overhangs and awnings; and
  3. are defined by human scale design elements (such as doors, windows, landscaping, etc.).

​No acceptable outcome is nominated.

​PO34

Development contributes towards high quality streetscape outcomes that integrate effectively with the street and along key pedestrian and cycle routes. 

​No acceptable outcome is nominated.

​PO35

Landscape treatments includes hard and soft elements that:

  1. is of a character and durability that reflects the centre;
  2. enhance the appearance of the centre;
  3. extends from the street edge into building entrances;
  4. emphasises a clear pedestrian entry point;
  5. screen unsightly components;
  6. provide shading; and
  7. reflects and reinforces a subtropical image through integrating landscape, outdoor and indoor spaces.

Editor's Note—Refer also to the Landscaping code. 

​No acceptable outcome is nominated.

Online Mapping

Version 2 - Current Planning Scheme

SELECT
  • Citation and commencement
  • Part 1 About the planning scheme
      BackPart 1 About the planning scheme
    • 1.1 Introduction
    • 1.2 Planning scheme components
    • 1.3 Interpretation
    • 1.4 Categories of development
    • 1.5 Hierarchy of assessment benchmarks
    • 1.6 Building work regulated under the planning scheme
    • 1.7 Local government administrative matters
  • Part 2 State planning provisions
      BackPart 2 State planning provisions
    • 2.1 State planning policy
    • 2.2 Regional plan
    • 2.3 Referral agency delegations
    • 2.4 Regulated requirements
  • Part 3 Strategic framework
      BackPart 3 Strategic framework
    • 3.1 Preliminary
    • 3.2 Strategic intent Open
        Back3.2 Strategic intent
      • The Gladstone Region Places Model
    • 3.3 Gateway to the world
    • 3.4 Community living
    • 3.5 Connecting our places
    • 3.6 Building it better: our urban areas
    • 3.7 Our environment and heritage
    • 3.8 Our rural and coastal townships and places
  • Part 4 Local Government Infrastructure Plan (LGIP)
      BackPart 4 Local Government Infrastructure Plan (LGIP)
    • 4.1 Preliminary
    • ​4.2 Planning assumptions Open
        Back​4.2 Planning assumptions
      • 4.2.1 Purpose
      • ​​4.2.2 Population and employment growth
      • ​4.2.3 Priority infrastructure area
      • ​​4.2.4 Desired standards of service
      • 4.2.5 Plans for trunk infrastructure
      • 4.2.7 Schedules of works
      • 4.2.8 Extrinsic material
  • Part 5 Tables of assessment
      BackPart 5 Tables of assessment
    • 5.1 Preliminary
    • 5.2 Reading the tables
    • 5.3 Categories of development and assessment
    • 5.4 Regulated categories of development and categories of assessment prescribed by the Regulation
    • 5.5 Categories of development and assessment—Material change of use Open
        Back5.5 Categories of development and assessment—Material change of use
      • 5.5.1 Low density residential zone
      • 5.5.2 Low-medium density residential zone
      • 5.5.3 Medium density residential zone
      • 5.5.4 Character residential zone
      • 5.5.5 Emerging community zone
      • 5.5.6 Mixed use zone
      • 5.5.7 Centre zone
      • 5.5.8 Principal centre zone
      • 5.5.9 Neighbourhood centre zone
      • 5.5.10 Specialised centre zone
      • 5.5.11 Low impact industry zone
      • 5.5.12 Medium impact industry zone
      • 5.5.13 Special industry zone
      • 5.5.14 Industry investigation zone
      • 5.5.15 Special purpose zone
      • 5.5.16 Rural zone
      • 5.5.17 Rural residential zone
      • 5.5.18 Township zone
      • 5.5.19 Major tourism zone
      • 5.5.20 Minor tourism zone
      • 5.5.21 Community facilities zone
      • 5.5.22 Sport and recreation zone
      • 5.5.23 Open space zone
      • 5.5.24 Environmental management zone
      • 5.5.25 Conservation zone
      • 5.5.26 Limited development zone (constrained land)
    • 5.6 Categories of development and assessment: Reconfiguring a lot
    • 5.7 Categories of development and assessment: Building work
    • 5.8 Categories of development and assessment: Operational work
    • 5.9 Categories of development and assessment: Local plans
    • 5.10 Categories of development and assessment: Overlays
  • Part 6 Zones
      BackPart 6 Zones
    • 6.2 Zone codes
        Back6.2 Zone codes
      • 6.2.1 Low density residential
      • 6.2.2 Low–medium density residential
      • 6.2.3 Medium density residential
      • 6.2.4 Character residential
      • 6.2.5 Centre
      • 6.2.6 Principal centre
      • 6.2.7 Neighbourhood centre
      • 6.2.8 Sport and recreation
      • 6.2.9 Open space
      • 6.2.10 Environmental management
      • 6.2.11 Conservation
      • 6.2.12 Low impact industry
      • 6.2.13 Medium impact industry
      • 6.2.14 Special industry
      • 6.2.15 Industry investigation
      • 6.2.16 Major tourism
      • 6.2.17 Minor tourism
      • 6.2.18 Community facilities
      • 6.2.19 Emerging community
      • 6.2.20 Limited development
      • 6.2.21 Mixed use
      • 6.2.22 Rural
      • 6.2.23 Rural residential
      • 6.2.24 Special purpose
      • 6.2.25 Specialised centre
      • 6.2.26 Township
  • Part 7 Local plans
  • Part 8 Overlays
      BackPart 8 Overlays
    • 8.2 Overlay codes Open
        Back8.2 Overlay codes
      • 8.2.1 Acid sulfate soils
      • 8.2.2 Airport environs
      • 8.2.3 Biodiversity
      • 8.2.4 Bushfire hazard
      • 8.2.5 Coastal hazard
      • 8.2.6 Extractive resources and minerals
      • 8.2.7 Flood hazard
      • 8.2.8 Hazardous activities
      • 8.2.9 Heritage
      • 8.2.10 Regional infrastructure
      • 8.2.11 Scenic amenity
      • 8.2.12 Steep land
      • 8.2.13 Water resource catchment
  • Part 9 Development codes
      BackPart 9 Development codes
    • 9.2 Development that cannot be made assessable in accordance with Schedule 6 of the Planning Regulation 2017
    • 9.3 Use codes Open
        Back9.3 Use codes
      • 9.3.1 Advertising devices
      • 9.3.2 Development design
      • 9.3.3 Extractive industry
      • 9.3.4 Home based business
      • 9.3.5 Landscaping
      • 9.3.6 Operational works
      • 9.3.7 Reconfiguring a lot
      • 9.3.8 Telecommunications facility use
  • Part 10 Other plans
  • Schedule 1 Definitions
      BackSchedule 1 Definitions
    • SC1.1 Use definitions Open
        BackSC1.1 Use definitions
      • SC1.1.1 Defined activity groups
      • SC1.1.2 Industry thresholds
      • Table Sc1.1.1—Index of use definitions
    • SC1.2 Administrative definitions
  • Schedule 2 Mapping
  • Schedule 3 Local Government Infrastructure Plan (LGIP) mapping and tables
      BackSchedule 3 Local Government Infrastructure Plan (LGIP) mapping and tables
    • SC3.1 Planning assumptions tables
    • SC3.2 Schedules of works
    • SC3.3 Local government infrastructure plan maps​
    • SC3.4 Glossary and abbreviations
  • Schedule 4 Notations required under the Planning Act 2016
  • Schedule 5 Land designated for community infrastructure
  • Schedule 6 Planning scheme policies
      BackSchedule 6 Planning scheme policies
    • SC6.1 Planning scheme policy index
    • SC6.2 Engineering design
    • SC6.3 Plans of development
    • SC6.4​ Community and economic needs assessment
    • SC6.5​ CBD redevelopment
    • SC6.6​ Beecher/Burua constant flow precinct
    • SC6.7 Flood hazard
    • SC6.8 Heritage
    • SC6.9 Non–resident workers accommodation
    • SC6.10 Vehicle parking rates
    • SC6.11 Waste management
  • Appendices

Gladstone Regional Council

Connect. Innovate. Diversify.

Return to top

Get in Touch

Phone

(07) 4970 0700

Opening Hours

8.30am - 5pm Monday to Friday

Social media

Contact Us  Email Us

Postal Address

PO Box 29, Gladstone Qld 4680

Council Offices

101 Goondoon Street, Gladstone Qld 4680
3 Don Cameron Drive, Calliope Qld 4680
41 Blomfield Street, Miriam Vale Qld 4677
Cnr Wyndham & Hayes Avenues, Boyne Island Qld 4680

Rural Transaction Centres

71 Springs Road, Agnes Water Qld 4677
47 Raglan Street, Mount Larcom Qld 4695

Footer Image Links

Gladstone Regional Council Logor Gladstone Entertainment Convention Centre Logo Gladstone Regional Art Gallery and Museum Logo Gladstone Regional Libraries Logo Gladstone Tondoon Botanic Gardens Logo Philip Street Communities and Families Precinct

Footer Acknowledgement

Gladstone Regional Council would like to acknowledge the Bailai, the Gurang, the Gooreng Gooreng and the Taribelang Bunda people who are the traditional custodians of this land. Gladstone Regional Council would also like to pay respect to Elders both past, present and emerging, and extend that respect to other Aboriginal and Torres Strait Islander people. Learn more about Council's Reconciliation Action Plan (RAP).

Chat Popup

Launch Chat

© 2025 Gladstone Regional Council

All content © Gladstone Regional Council Planning Scheme. All Rights Reserved.

Powered by Jadu Central.

  • Privacy
  • Right to Information
  • Login
Back to the top
Print footer