Version 1 - Superseded Planning Scheme
- Citation and commencement
- Part 1 About the planning scheme
- Part 2 State planning provisions
- Part 3 Strategic framework
- Part 4 Local Government Infrastructure Plan (LGIP)
- Part 5 Tables of assessment
- Part 6 Zones
- Part 7 Local plans
- Part 8 Overlays
- Part 9 Development codes
- Part 10 Other plans
- Schedule 1 Definitions
- Schedule 2 Mapping
- Schedule 3 Local Government Infrastructure Plan (LGIP) mapping and tables
- Schedule 4 Notations required under the Sustainable Planning Act 2009
- Schedule 5 Land designated for community infrastructure
- Schedule 6 Planning scheme policies
- Appendices
6.2.19 Emerging community
6.2.19.1 Application
This code applies to development where the code is identified as applicable in a table of assessment.
When using this code, reference should be made to section 5.3.2 and where applicable, section 5.3.3 located in Part 5.
6.2.19.2 Purpose
- The purpose of the emerging community zone code is to:
- Identify and conserve land that may be suitable for urban development in the future.
- Manage the timely conversion of non–urban land to urban purposes when needed to meet community needs.
- Prevent or discourage development that is likely to compromise appropriate longer term use.
Note—Future urban development must be in accordance with an approved structure plan. The Strategic Framework provides further guidance on these matters.
- The purpose of the zone will be achieved through the following overall outcomes:
- Development of land that is considered generally suitable for urban purposes only occurs after detailed planning studies have been undertaken to identify scenic, environmental and infrastructure constraints and opportunities.
- Interim development does not compromise the future development potential of the area for urban purposes and uses that are incompatible with residential uses are not encouraged.
- Development is based upon the efficient provision of infrastructure, consideration of environmental constraints and desired settlement pattern for the area.
- Significant historical, architectural, topographic, landscape, scenic, social, recreational and cultural features and associations, as well as natural habitat areas, wildlife corridors, wetlands and waterway corridors are protected and enhanced.
- Proposed roads and other transport corridors are coordinated and interconnected to ensure pedestrian, bike, public transport and private vehicles have accessibility between neighbourhoods, centres and other locations.
- Development responds to land constraints, including but not limited to topography, bushfire and flooding.
6.2.19.3 Assessment criteria
Table 6.2.19.3.1—Self–assessable and assessable development
Performance outcomes | Acceptable outcomes |
---|---|
Use – Caretaker's accommodation | |
PO1 Development:
|
AO1.1 No more than 1 caretaker's accommodation unit is established on the site. |
AO1.2 The caretaker's accommodation unit is a maximum of 100m2 GFA. |
|
Use – Sales office | |
PO2 The use does not adversely impact on the amenity of the surrounding land uses and local character. |
AO2.1 Development of the sales office is in place for no more than two years. |
AO2.2 The site coverage of the building is a maximum of 50% of the site area. |
|
AO2.3 There are a maximum of 2 employees on site at any one time. |
|
AO2.4 The use operates between 9am and 6pm Monday to Saturday and 9am to 1pm on Sunday. |
|
Building height | |
PO3 Buildings :
|
AO3 Building height does not exceed 8.5m. |
Residential density | |
PO4 Development reflects the low density character of the area. |
AO4.1 Residential density is limited to:
|
AO4.2 Where a dwelling house, any secondary dwelling is:
|
|
For all assessable development | |
Land use | |
PO5 Interim non–urban development does not reduce or preclude the long–term use of the site or nearby land for urban purposes, having regard to the scale and nature of the activity and its likely impacts. |
No acceptable outcome is nominated. |
Effects of development | |
PO6 Development responds sensitively to on–site and surrounding topography, drainage patterns, utility services, access, vegetation and adjoining land use, such that:
|
No acceptable outcome is nominated. |
PO7 Development maintains a high level of amenity within the site and minimises impacts on surrounding areas, having regard to:
Note—Applicants may be required to engage specialists to provide detailed investigations into the above matters in order to demonstrate compliance with this performance criterion. |
No acceptable outcome is nominated. |
PO8 Development is to:
|
No acceptable outcome is nominated. |
Use – Outdoor sport and recreation | |
PO9 All buildings must:
|
No acceptable outcome is nominated. |
PO10 Development provides adequate separation, screening and buffering from any adjoining residential premises or residential zone so that residential privacy and amenity is not adversely affected. |
AO10.1
Development that shares a boundary with a residential premises or residential zone requires a minimum boundary setback of 6m for:
|
AO10.2 Development that shares a boundary with a residential premises or residential zone must ensure all buildings:
Note—Refer also to the Landscape code. |
|
PO11 Outdoor lighting does not adversely affect the amenity of adjoining properties or create a traffic hazard on adjacent roads. |
AO11.1 Light emanating from any source complies with Australian Standard AS4282 Control of the Obtrusive Effects of Outdoor Lighting as amended. |
AO11.2 Outdoor lighting is provided in accordance with Australian Standard AS1158.1.1 – Road Lighting – Vehicular Traffic (Category V) Lighting – Performance and Installation Design Requirements as amended. |